Sludge filter press is mainly used in various industries of sludge dehydration, sludge recovery, the lower the moisture content, the better, some are very sticky, some are relatively dry, the moisture content of mud cake is still very high, what is the cause of this? Frame filter press filter cake formation is not uniform, one of the reasons for the high water content of mud cake is that the feeding system is not timely, can not meet the pressure of the mixture in the filtration process, the formation of filter cake is not uniform.

Works Chemical- Sludge conditioner, sludge dewatering synergist manufacturer

The sludge conditioned by the new sludge conditioner is injected into the filter chamber of the filter press at a pressure of about 1.0MP, which is conducive to efficient filtration of free water in the sludge. The accumulated sludge in the filter chamber reaches the design capacity of the filter press. The final dryness of the dehydrated sludge is closely related to the chemical conditioning and modification effect. It is also closely related to the filling degree of the press chamber, the increase rate of the pressing pressure, the holding time of the pressing pressure, etc., when the chemical conditioning achieves a good effect, the high pressure feeding and high pressure pressing can shorten the time of the entire pressing section, improve the production efficiency, and the automatic unloading of the filter material (filter cloth) and the reverse blowing are completed at the same time, which not only reduces the labor intensity of the control personnel, but also improves the efficiency of the pressing mud.

Features of the new sludge conditioner:

1, the use of new sludge conditioner can significantly reduce the weight of sludge, mud cake moisture content can be reduced to 40%-60%, saving disposal costs.

2. The combination of the new sludge conditioner and the plate and frame filter press can effectively improve the sludge pressing efficiency, and the pressing efficiency can be increased by 100%-500%, greatly reducing the mud pressing cycle.

3, because the new sludge conditioner does not need to add lime, the weight of the sludge is reduced, and the equipment is not corroded, which is conducive to the later sludge incineration, brick making and composting.

4, the new sludge conditioner can effectively reduce the number of filter cloth replacement, saving operating costs.